Plastic Particle Spiral Belt Mixer

Pay attention to the feeding sequence when using a horizontal mixer. Generally, large materials, such as corn meal, soybean meal, etc., are put in first, and then group materials, such as premix, are put in. Note that the premix should not be fed by a screw elevator. Instead, it should be fed by a disposable tipping bucket or manually, which can avoid the segregation and loss of effective ingredients in the premix.

The horizontal double axis screw belt mixer is used to mix dry and powdery materials, achieving uniform mixing. During the mixing process, the material is subjected to two rotor movements in opposite directions, resulting in a composite motion. The dual axis blade drives the material to rotate clockwise and counterclockwise along the inner wall of the machine slot. The material near the axis rotates around the axis, pushing from the inside to both sides in the axial direction. The outer spiral drives the material near the cylinder wall to rotate around the axis, pushing from both sides to the inside in the axial direction. This causes convective circulation and shear infiltration inside the material cylinder, achieving rapid and uniform mixing of the material in a short period of time