Things to be aware of when adjusting a double planetary mixer

After we purchased a planetary mixer, in order to ensure that the machinery and equipment can operate normally, adjustments must be made before it is declared ready for use. However, because everyone is not very familiar with the machinery and equipment, adjusting them poses a certain degree of difficulty. Here are some points to note when adjusting a double planetary mixer for your learning and reference.

The first step is to connect the switch power supply and check if the grounding wire of the machinery and equipment is connected properly. After starting the double planetary mixer, check if its large planetary frame rotates in a clockwise direction. If it rotates in the opposite direction, it indicates that the electrical connection is incorrect and the switch power supply needs to be reconnected.

Subsequently, the material cylinder of the double planetary mixer should be placed into the motor shaft. The material cylinder must be fixed and sealed before the machine equipment can be started to avoid damage to the operating personnel caused by the rotation of the large planetary frame. If the raw material requires vacuum pump defoaming, it is also necessary to check whether the water storage tank of the machine equipment is full before turning on the mechanical pump. Additionally, it is important to check the tightness of the mechanical pump. If there is any air leakage, it needs to be corrected immediately. There are also precautions for turning off the mechanical pump. Be sure to close the relevant valves.

After using the double planetary mixer, it is also necessary to conduct cleaning, but this must be done under the premise of turning off the power to prevent the risk of electric shock accidents. And as actual operators, it is important to note that when the planetary mixer is operating, one must not put their hands into the feed cylinder. Everyone should have seen similar mistakes that have led to tragic consequences. If any abnormalities are discovered during the actual operation of the double planetary mixer, it is necessary to immediately shut it down for inspection to prevent more serious malfunctions.

LONG JUN High viscosity material mixer series products: planetary mixer, double planetary mixer, double planetary power mixer, double planetary double power mixer, laboratory planetary mixer, laboratory double planetary mixer, laboratory vacuum mixer, vacuum mixer, lifting planetary mixer, gantry planetary mixer, silicone rubber planetary mixer, kneading machine, vacuum kneading machine, screw extrusion sigma kneader mixer.