What are the material requirements for a horizontal screw belt mixer?

Discharge method of horizontal screw belt mixer

Bottom discharge method of the mixer: The powder material adopts a pneumatic large door structure, which has the advantages of fast discharge and no residue; For high fineness materials or semi fluid materials, manual butterfly valves or pneumatic butterfly valves are used. Manual butterfly valves are economical and applicable, while pneumatic butterfly valves have good sealing performance for semi fluids, but the cost is higher than manual butterfly valves. In situations where heating or cooling is required, a jacket can be configured. There are two heating methods to choose from: electric heating and thermal oil heating. Electric heating is convenient, but the heating speed is slow and the energy consumption is high; Heating with thermal oil requires the configuration of an oil pot, thermal power, and pipelines, which requires a large investment but has a fast heating rate and low energy consumption. The cooling process can directly inject cooling water into the jacket, which has a large heat exchange area and fast cooling speed. The motor is directly connected to the mixing spindle through a cycloidal pinwheel reducer, which has a simple structure, high operational reliability, and easy maintenance.

Material requirements for horizontal screw belt mixer

The material requirements for the horizontal screw belt mixer should be selected according to the material situation. Users can choose materials such as ordinary carbon steel and stainless steel. If the material is too corrosive, high-grade stainless steel materials or corrosion-resistant lining layers can be selected. According to the material usage level requirements, surface treatment can be rough polishing, fine polishing, or mirror polishing.

Scope of use of horizontal screw belt mixer

The horizontal screw belt mixer is widely used for the mixing of solid (i.e. powder to powder) and slurry (i.e. powder to slurry) in putty paste, real stone paint, dry powder, putty, medicine, food, chemicals, feed, ceramics, refractory materials, etc., especially suitable for the mixing of viscous materials. This mixer is not suitable for mixing materials with high fiber content and significant density differences. For industries such as putty, real stone paint, biology, medicine, and food, it is recommended to use stainless steel material. In general, when mixing dry powder sand slurry containing vitrified microbeads, the horizontal screw belt mixer is fast. The motor is directly connected to the mixing spindle through a cycloidal pinwheel reducer, which has a simple structure, high operational reliability, and easy maintenance.