Matters to be noted when adjusting a double planetary mixer

After purchasing a planetary mixer, to ensure the equipment operates normally, adjustments must be made before it is officially put into servce. However, since we are not yet fully familiar with the equipment, the adjustment process presents certain difficulties. The following points regarding the adjustment of the double planetary mixer are provided for your refernce.

First, you must connect the power supply and check if the equipment's grounding connection is normal. After starting the double planetary mixer, check if the planetary frame rotates in a clockwise dction. If it is rotating in reverse, it indicates a wiring error, and the power supply must be reconnected.

Next, place the mixing vessel onto the motor shaft of the double plany mixer. The vessel must be secured and sealed before starting the equipment to prevent the rotating planetary frame from causing injury to the operator. If vacuum degassing of the material is requiredhe equipment's water tank is filled before starting the vacuum pump. Additionally, check the vacuum pump's sealing; if there is a leak, it must be corrected immediately. There are ac procedures for shutting down the vacuum pump; it is essential to close the relevant valves.

After using the double planetary mixer, it must be cleaned, but this must be done wipower supply turned off to avoid the risk of electric shock. Operators must also note that when the planetary mixer is running, it is strictly forbidden to insert hands into the mixing vessel; one has seen the bloody lessons caused by similar mistakes. If any abnormal conditions are discovered during operation, the machine must be immediately shut down for inspection to prevent the fault from becoming m